Meet Neo, your AI-powered Co-GP.Learn more
Covercy
Getting started

Review a single position

Open one investor's position from any positions list, read its headline figures, ownership, terms, placement, contributions, distributions, transfers and change history in one view, and correct the position's own figures.

By the end of this guide you'll be able to open any single investor position in Covercy One, read everything the platform holds about it — its headline figures, terms, placement and commission, ownership, the contributions and distributions behind those figures, its transfer lineage, and who changed what and when — and correct the position's own figures when they were recorded wrong.

Note

You need access to your firm's GP workspace and a holding with at least one investor position. The position view is a GP surface only — nothing in it is shown to investors in the portal.

Open a position

The same position view opens from every place positions are listed, and it shows the same figures and records wherever you start from:

  1. Open a holding and go to its Overview tab, then select the position's row.
  2. Or open Positions and select a row there.
  3. Or open an investing entity and select a row on its Positions tab, or in the positions table on its overview.
  4. The position opens as a wide panel over the list you came from. Close it when you're done and you're back on that list.

If one investor holds more than one position in the same share class, the list shows them as a single row. Selecting that row lists the individual positions first — each with its fundraise, deal date, and committed amount — and choosing one opens its view, with a control that takes you back to the list.

Tip

While the view is open, your browser's address identifies the position. Copy the page address to send a colleague straight to the same position, or to come back to it later — loading that address reopens the view. There's no separate copy-link button. Closing the view removes the position from the address again.

Read the header

The header names the position and gives you the actions it supports:

  • The title reads the holding name followed by the investing entity name. The entity name is a link that opens that entity's page in a new browser tab — the position view stays open in the tab you were on.
  • The line under the title shows the share class and the fundraise the position came from, when there is one.
  • The position's status, Open or Closed. A position that was closed by an ownership transfer reads Closed.
  • View as Investor, which opens the investor portal in a new tab previewed as the entity's primary contact.
  • Transfer ownership, which starts the transfer wizard.

Under the share class line, the header shows the investing entity's primary contact on one line: their name as a link to their contact page (again in a new tab), their primary phone number, and an All contacts link to the entity's Contacts tab. Only the primary contact appears here, and you can't edit a contact from this view. If the entity has no primary contact yet, the line reads None set with a Set in investing entity page link that takes you to the entity's Contacts tab to fix it.

Note

View as Investor is always shown, but it's disabled when there's no primary contact to preview as — hover it and the tooltip tells you why. Set a primary contact on the investing entity and the action becomes available.

Check the summary strip

Above the tabs, a summary strip carries the position's headline figures: Committed, Contributed, Distributed, Capital account, and the position's ownership share. Money is shown in the holding's currency, without cents when the amount is whole — $500,000, but $1,234.50 — everywhere in the position view.

  • Subscription appears only when the holding uses pricing — the same rule that shows the Bonus, Gross-up, and Subscription amount rows on the Overview tab (see below). Where pricing doesn't apply, the subscription amount would only repeat Committed, so it's left out.
  • Deal % is shown for a common-equity position. Where a position has no deal ownership — a debt or promote class, for example — the strip shows Class % in its place, so the ownership figure is never blank.
  • Units appears only when the position's share class is unitized. For a class that isn't unitized, no units and no price per unit appear anywhere in the view.

Tip

Nothing in the strip is typed in — every total is derived from the records behind the position, and each figure matches the same column on the positions table you opened it from. The only difference is display: the view drops zero cents where a table shows them. If the figures ever look different beyond that, reload rather than assuming one of them is right.

Work through the tabs

Overview is laid out in two columns, with every field on its own row — the label on the left and the value on the right. The left column holds what you can correct: Terms, then Placement firm & commission. The right column holds what comes from records and is read-only: Ownership (the share class and Class %), Performance (IRR, equity multiple, cash on cash, and taxes withheld), and any custom fields on the position. On a phone the columns stack, with Ownership and Performance first.

Terms shows the deal date, the value date (Same as deal date when none is set), and the uncalled amount, and reads the position's figures as one chain from the commitment down: Committed amount, Bonus, Gross-up, Subscription amount, Price per unit, and Units. Price per unit and Units appear only for a unitized share class, and Price per unit keeps up to four decimals, for example $5.0877. Deal % and units aren't repeated in Ownership — the summary strip already shows them.

Placement firm & commission shows the position's placement firm beside the section's title, then its commission as a small table with the columns Leg, Rate, and Amount — a flat leg shows a dash for its rate. The table closes with a Commission row, which is the sum of the legs, and a Net to fund row. A commission recorded without a breakdown shows as a single leg, and a position with no legs says so and still shows Commission and Net to fund.

The pricing rows (Bonus, Gross-up, and Subscription amount) and the Placement firm & commission section appear only when they apply to the position's holding, so every position in the same holding shows the same rows and sections. Pricing shows when the holding uses a gross-up or bonus, or when any of its positions carries a premium. Placement firm & commission shows when the holding has a selling group, or when any of its positions was booked through a placement firm or carries a commission. On a plain holding with neither, Terms reads Deal date, Value date, Committed amount, and Uncalled, and there's no commission section.

Tip

Because the decision is made for the whole holding, a position with no premium of its own can still show the pricing rows — with dashes for its gross-up and bonus — when another position in the holding has one. Hidden rows and sections never change any stored figure.

When Placement firm & commission is shown, the placement firm reads exactly as the Firm column does on the positions table: the firm's name where the position was booked through one, Direct where it wasn't — including positions you imported or entered by hand — and Unknown where an attribution exists but its firm name couldn't be resolved.

Warning

On an older position, Covercy One may not hold the commission figures for that booking. Where it doesn't, they read as unknown rather than zero — an unknown figure means the platform never captured it, not that there was nothing to capture. Treat the two as different answers when you're reconciling.

Contributions lists the records behind Contributed: the position's commitment, each capital call issued against it with its called amount, and each payment recorded against it, grouped under the call it settles. A payment with no call behind it is listed on its own. Every payment shows its amount, received date, method, and where it came from — Paid via Covercy, Recorded manually, Imported, or Migrated. No payment appears without one of those tags. The tab also links through to the holding's Contributions tab.

Distributions lists every distribution this position has an allocation in, with the investor's return of capital, preferred, and profit amounts, the gross, tax withheld, and net paid, the position's capital account after that distribution, the distribution's status, and whether it was paid through Covercy or outside it. Each row links to its distribution, and a totals row sums the distributions that count — its net paid equals Distributed in the summary strip, and its tax withheld equals the taxes withheld in the Performance section.

Note

Draft and Notice sent distributions are listed for visibility but marked as not counted — they're excluded from the totals row and from Distributed, so a distribution you haven't finalized never inflates what the investor has received.

Transfers & history shows how the position came to exist — raised in a fundraise, brought in by an import, entered manually, or opened by a transfer — along with its booked commitment and subscription amount, plus units and price per unit for a unitized class, and every ownership transfer in or out of it. A transfer out names each receiving investing entity and links to its positions; a transfer in names the entity the position came from and links to theirs. If the position was closed by a transfer, the view says so and who it went to.

Activity lists, newest first, when each change happened, who made it (a person on your team, or the system), and what changed:

  • Every correction to the position's own figures — deal date, value date, committed amount, gross-up, bonus, subscription amount, price per unit, units, placement firm, commission legs, and total commission — with the value before and after. A commission change reads one line per leg that changed, and a placement firm change names the firms, with Direct for none.
  • The position's recorded history: its opportunity being created and each move of its status (for example, Moved to Soft Circled), the position being created or imported and by whom, each transfer in or out, and the position being closed.

Note

Signatures and payments made through Covercy aren't listed on the Activity tab — you'll find payments on the Contributions tab.

Correct a position's figures

Use Edit position to correct what was recorded for this investor's position. You can correct:

  • Terms: the deal date, the value date, and the committed amount, plus the price per unit and the units on a unitized share class.
  • Bonus and Gross-up: the rates, on a share class that prices by units. A class that isn't unitized, such as a Promote class, offers neither.
  • Placement firm: one of the firms assigned to the holding, or Direct.
  • Commission: each leg's rate (for a percentage leg) or amount (for a flat leg). You can also add a leg — give it a name and a rate or a flat amount — or remove one.

Capital calls, payments, distributions, and transfers stay read-only here, and Transfer ownership in the header works as before.

  1. On the Overview tab, select Edit position on the tab bar. The fields you can correct turn into inputs in the same rows they read in. Calculated rows — Uncalled, Subscription amount, Commission, and Net to fund — stay read-only, and the right column dims to remind you that Contributed, Distributed, and performance change only by correcting the records on their tabs.
  2. Change any of the fields. You can change several in one session — for example the commitment, the gross-up, and a commission leg's rate — and they'll be saved and worked out together. On a unitized class you can change the commitment, the price per unit, and the units freely; you don't have to keep them in step yourself.
  3. Check your changes as you go. Each changed field shows its previous value struck through beside it, and the footer counts your changes and names each one with its old and new value. While you edit commission legs, Commission and Net to fund update to show what will be saved; if your edit also moves the subscription amount, they keep their saved figures and say the commission is settled when you review and save.
  4. Select Review & save. When your edit affects other figures, a Review changes dialog lists each figure before and after. If the edit could mean two things — for example, a new commitment could buy more units at the same price, or the same units at a higher price — the dialog asks which you meant, with the usual choice preselected. Each choice states its result in figures, and the figure your choice keeps is listed with Unchanged in the After column. An edit that affects nothing else, such as a new deal date, saves straight away.
  5. Confirm to save, or use Back to editing to return to the form with your entries intact. To discard the whole session, select Cancel — every field goes back to its saved value.

After you save, the summary strip, Ownership, Terms, and Placement firm & commission show the new figures, and each change is listed on the Activity tab with your name and the values before and after. Because everything in one session is worked out together, the subscription amount, units or price per unit, commission, net to fund, and uncalled always agree after a save.

Rules to know when you correct a position

  • Price per unit corrects the price this investor paid. To change what units in the class are worth, record a new price on the share class instead.
  • Correcting the Bonus or Gross-up moves the subscription amount. If you change only a rate, the commitment stays, and the dialog asks whether the units or the price per unit moves with it, with units preselected.
  • When a change to the commitment moves the subscription amount on a position that carries a commission, the dialog asks whether the commission follows the new amount or stays as it is.
  • Switching the placement firm to Direct asks whether to keep the commission (preselected) or remove it. Switching to another firm keeps the commission, gross-up, and bonus as they are, and the dialog reminds you to adjust them by hand if the new firm's terms are different.
  • The placement firm list names every firm assigned to the holding, even a firm your user isn't a member of.
  • A committed amount below what has already been called on the position is refused, and the message names the lowest commitment you can enter.
  • Each field is checked as you type. An invalid value tells you what the field accepts, and Review & save stays unavailable until you fix it — your other edits in the session are kept.
  • Correcting a position never changes a closing that already ran.

Warning

If someone else changed the position while you were editing, your save is refused with This position changed. Reload and try again. Nothing is written — reload the position, check its current figures, and make your correction again.

Note

A position that was transferred out can't be corrected. Edit position stays clickable, but instead of opening the editor it explains the date the position was transferred out and links to the positions that received it — correct those instead.

Verify it worked and where to get help

You've read the position correctly when the strip's Committed, Contributed, Distributed, Capital account, and ownership percentage match the same position's row on the list you opened it from, and when the Contributions and Distributions tabs account for the Contributed and Distributed figures. A correction worked when the Overview shows the saved figures and the Activity tab lists the change with your name. If one tab or section shows an error instead of its content, use its retry control — the rest of the view still loads and stays usable. If a figure still looks wrong after a retry, or a position you expect isn't listed, check that you're looking at the right share class and that the position is Open, then reach out to our team for help.

Why do I get a list of positions instead of the position view?
Because that investor holds more than one position in that share class, and the list showed them as one aggregated row. Pick the position you want — each is listed with its fundraise, deal date, and committed amount — and use the back control in the view to return to the list.
Why is Capital account showing a dash?
A dash means the capital account couldn't be worked out for that position. Covercy One shows the dash rather than substituting an approximation, so you're never shown a number it can't stand behind. Every other figure in the view still displays normally.
Why don't I see units or a price per unit?
The position's share class isn't unitized. Units and price per unit are left out of the summary strip and every other part of the view for a non-unitized class, rather than shown as zero.
Why does the ownership figure say Class % on one position and Deal % on another?
Deal % is the position's share of the whole deal and is shown for common-equity positions. A position with no deal ownership — in a debt or promote class, for example — shows its Class %, its share within that share class, instead, so the cell is never empty.
Why don't I see the pricing rows or a Placement firm & commission section?
They show only when they apply to the holding. The Bonus, Gross-up, and Subscription amount rows appear when the holding uses a gross-up or bonus or any of its positions carries a premium; Placement firm & commission appears when the holding has a selling group or any of its positions was booked through a placement firm or carries a commission. Without pricing, the strip's Subscription figure is left out too, because it would only repeat the commitment.
Why can't I edit the gross-up or bonus?
Gross-up and bonus can be corrected only on a share class that prices by units. On a class that isn't unitized, such as a Promote class, those rates aren't offered for editing.
How do I change what units in a share class are worth?
Record a new price on the share class. The Price per unit field you edit on a position only corrects the price that one investor paid.
Can I edit a payment or a distribution from the position view?
No. Everything on the Contributions and Distributions tabs is read-only here; follow the link on the row to the distribution, or work from the holding's Contributions tab, to make a change. From the position view you can correct the position's own figures with Edit position, and change its owner with Transfer ownership.
Why doesn't Edit position open the editor?
The position was transferred out. Its figures are frozen, so Edit position explains the transfer date and links to the positions that received it — correct those instead.
If I correct a position's commission, does a closing that already ran change?
No. Correcting a position never changes a closing that already ran.
The position is marked Closed — what happened to it?
A position reads Closed once its ownership was transferred away. Open the Transfers & history tab to see which investing entities received it and follow the links to their positions.
Can I send someone a link straight to a position?
Yes — copy your browser's address while the view is open and share it with a colleague. Loading it reopens the same position. Anyone you share it with needs access to that position in your workspace for the view to open for them.

Related articles